CAS # 64-19-7
F.W. 60.05
Corrosive, Flammable Liquid
DOT: Acetic Acid, Glacial, 8, UN2789, PG II
CAS # 67-64-1
F.W. 58.08
Flammable Liquid
DOT: Acetone, 3, UN1090, PG II
CAS # 75-05-8
F.W. 41.05
Flammable Liquid
DOT: Acetonitrile, 3, UN1648, PG II
CAS # 7784-27-2
F.W. 375.13
Oxidizer
DOT: Aluminum Nitrate, 5.1, UN1438, PG III
Flammable Liquid
DOT: Tinctures, Medicinal, 3, UN1293, PG II
F.W. 60.10
Flammable Liquid
DOT: Isopropyl Alcohol, Solution, 3, UN1219, PG II
Useful etchant for superalloys and stainless steels as well as Ni-Cu alloys. Good for grain structure. Generally used a swab etch.
Flammable Liquids, Corrosive, n.o.s. (Ethanol, Hydrochloric Acid, Cupric Chloride mixture), 3(8), UN2924, PG II
Ferrite and Martensite are darkened. Austenite appears light and carbides are unaffected. For Stainless Steels.
Flammable Liquids, Corrosive, n.o.s. (Methanol, Nitric Acid, Cupric Chloride mixture), 3(8), UN2924, PG II
Most common etchant for Aluminum and Aluminum Alloys except high Si alloys.
Corrosive, Acidic, Inorganic, n.o.s. (Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid mixture), 8, UN3264, PG III
Useful etchant for most Titanium based materials especially Ti-Al-V alloys.
Corrosive, Acidic, Inorganic, n.o.s. (Hydrofluoric Acid, Nitric Acid mixture), 8, UN3264, PG III
Used for revealing general structure of Stainless Steels.
Corrosive Liquid, Acidic, Inorganic, n.o.s. (Hydrochloric Acid mixture), 8, UN3264, PG II
(1-Propanol)
CAS # 71-23-8
F.W. 60.10
Flammable Liquid
DOT: n-Propyl Alcohol, 3, UN1274, PG III
